Facilities Operations and Management

Related Courses

Title Description Organizations Competencies
2009 Uniform Plumbing Code Plumbing Fixtures and Fixture Fittings

This course discusses the Uniform Plumbing Code’s provisions in Chapter 4 governing the use and installation of plumbing fixtures and fittings. While covering these provisions, special attention will be given to provisions that have changed since the 2006 edition in an effort to alleviate any confusion about the new requirements. Some topics that will be discussed include, but are not limited to materials, water conserving fixtures, prohibited fixtures, and installation.

Basic Requirements, Building Systems, Facilities Operations and Management, Infrastructure, Safety
2009 Uniform Plumbing Code Sizing Indirect Waste

This lesson will guide you through the methods used to properly size indirect waste receptors. All relevant Code sections of the 2009 UPC will be addressed. At the end of the lesson, you will be able to: (1) Define and Identify an Indirect Waste Receptor (2) Identify the proper location of an Indirect Waste Receptor (3) Perform sizing of Indirect Waste Receptors for various layouts.

Basic Requirements, Building Systems, Facilities Operations and Management, Infrastructure, Safety
2009 Uniform Plumbing Code Water Pipe Sizing

CEU’s: 0.2 This lesson will guide you through the methods used to properly size water pipe. All relevant Code sections of the 2009 UPC will be addressed. At the end of the lesson, you will be able to: (1) Calculate the total fixture units in a building. (2) Determine the distance from the meter to the most remote outlet in the system. (3) Factor in the elevation above the meter to highest cold water outlet in the system. (4) Use the available pressure at peak demand to determine the correct water pipe size for a given diagram.

Building Systems, Facilities Operations and Management
2012 NFPA 70E® Self-Guided Online Training Course Series

2012 NFPA 70E® Self-Guided Online Training Course Series – comprised of six online courses that can be taken together at a series price or as individual online course modules.

Avoid electrical injuries, deaths, and OSHA violations. The NFPA 70E® Online Course Series explains how and why NFPA 70E protects personnel from potentially deadly hazards. Hundreds of worker deaths and thousands of injuries could be prevented each year by following 2012 NFPA 70E: Standard for Electrical Safety in the Workplace. Originally developed at OSHA’s request, NFPA 70E provisions used to identify electrical safety hazards and reduce employee exposure to those hazards. Get the NFPA 70E training you need — on your own time — with the NFPA 70E Online Course Series. This 6-part series provides vital information about today’s Standard through individual courses addressing the safety-related work practices and procedures that employees, supervisors, and owners need to understand to avoid electrical tragedies on the job.

Basic Requirements, Building Systems, Infrastructure, Operating and Maintaining Electrical and Mechanical Systems, Safety
2012 NFPA 70E®: Electrical Hazard Analysis Self-Guided Online Course

Lives depend on your ability to apply NFPA 70E® to conduct an accurate electrical hazard analysis and determine safe approach boundaries. This self-paced online course addresses the requirements and methods in the 2012 NFPA 70E: Standard for Electrical Safety in the Workplace for analyzing the hazards and risks of work that involves exposure to electrical hazards. Electrical Hazard Analysis — Course 4 in the NFPA 70E Online Course Series — consists of two lessons that cover the assessment of arc flash hazards and electrical shock hazards. This analysis becomes the basis for selection of appropriate safe work practices including Personal Protective Equipment (PPE) as covered in other courses.

Basic Requirements, Building Systems, Infrastructure, Operating and Maintaining Electrical and Mechanical Systems, Safety
2012 NFPA 70E®: Establishing an Electrically Safe Work Condition Self-Guided Online Course

Understand the importance of establishing an electrically safe work condition using the 2012 edition of NFPA 70E. NFPA 70E: Standard for Electrical Safety in the Workplace helps you avoid electrical injuries, deaths, and OSHA violations. This self-paced online course covers the elements of an “electrically safe work condition” commonly called lockout/tagout procedures, the principles of lockout/tagout, energy control procedures, and temporary protective grounding. Establishing an Electrically Safe Work Condition — Course 2 in the NFPA 70E Online Course Series — consists of two lessons that cover the essential steps in lockout/tagout procedures that are used to establish an electrically safe work condition as well as the details of those procedures.

Basic Requirements, Building Systems, Infrastructure, Operating and Maintaining Electrical and Mechanical Systems, Safety
2012 NFPA 70E®: Personal Protective Equipment Self-Guided Online Course

Understand the importance of adequate Personal Protective Equipment and how NFPA 70E® helps you choose the right PPE for the job. Arc flash is immediate and can happen without touching live components. This self-paced online course covers the general requirements in the 2012 NFPA 70E: Standard for Electrical Safety in the Workplace for Personal Protective Equipment (PPE) and arc-rated clothing — including how to select PPE for the specific hazards involved with various tasks. Personal Protection Equipment — Course 5 in the NFPA 70E Online Course Series — consists of three lessons on the requirements for selection and use of arc-rated clothing as well as the selection and use of other PPE for protection from arc flash and shock hazards.

Basic Requirements, Building Systems, Infrastructure, Operating and Maintaining Electrical and Mechanical Systems, Safety
2012 NFPA 70E®: Safety-Related Maintenance and Special Equipment Self-Guided Online Course

Maintenance is vital to electrical safety in the workplace. Learn about Safety-Related Maintenance and Special Equipment as addressed by NFPA 70E®. This self-paced online course covers the requirements in Chapter 2 and Chapter 3 of the 2012 NFPA 70E: Standard for Electrical Safety in the Workplace. Safety-Related Maintenance and Special Equipment — Course 6 in the NFPA 70E Online Course Series — consists of two lessons that cover required maintenance of electrical equipment as it relates to electrical safety in the workplace and requirements for safety of employees who work with specific special types of equipment. This includes some hazards not specifically addressed in Chapter 1 of NFPA 70E.

Basic Requirements, Building Systems, Infrastructure, Operating and Maintaining Electrical and Mechanical Systems, Safety
2012 NFPA 70E®: Working While Exposed to Electrical Hazards Self-Guided Online Course

Working “live” or “energized” exposes personnel to even greater electrical risks. Learn how compliance with NFPA 70E® provides protection. This self-paced online course covers the sections of the 2012 NFPA 70E: Standard for Electrical Safety in the Workplace that provide workers with safety guidelines for situations where de-energizing is not possible or where de-energizing could create increased or additional hazards. Working While Exposed to Electrical Hazards — Course 3 in the NFPA 70E Online Course Series — presents three lessons that cover the requirements for analysis of the electrical hazards and risks of working on energized electrical parts, the requirements for energized electrical work permits, and other precautions for activities involving electrical hazards.

Basic Requirements, Building Systems, Infrastructure, Operating and Maintaining Electrical and Mechanical Systems, Safety
2013 NFPA 13 Self-Guided Online Training Course Series

2013 NFPA 13 Self-Guided Online Training Course Series – comprised of six online courses that can be taken together at a series price or as individual online course modules.

This self-guided online series provides an essential basis in fire sprinkler systems and the 2013 NFPA 13: Standard for the Installation of Sprinkler Systems. Based on the 2013 edition of NFPA 13, this self-guided online course series introduces students to the basic principles of the components, application, design, installation, testing, maintenance, and use of automatic sprinkler systems. The series covers the components of the four basic types of automatic sprinkler systems and describes how these components interrelate to form a fire control or fire suppression system that will achieve a facility’s fire safety objectives for life safety, property protection, mission continuity, heritage preservation, and environmental protection.

Basic Requirements, Building Systems, Facilities Operations, Maintenance and Engineering, Infrastructure Systems, Occupant Interface, Operating, Maintaining and Testing Life Safety Systems, Safety
1 2 3 20